SCS G3P8 Spin Coater - Instructional Center
The SCS G3P8 Spin Coater series accurately applies liquid coating materials on planar substrates. This spin coater stores and executes up to 30 programs with up to 20 steps each. Each step of the cycle can be defined in the range of 0-9999RPM with ramp times from 0.1 to 25.5 seconds. Ramp-up time is dependent on the chuck size and the substrate weight. A single step may have a dwell time of up to 999 seconds. Coating cycles are interruptible by the operator at any time. This spin coater has chucks designed for wafers or pieces 1-4 inches
You must first log in to see the status.
- Tran-Vinh Nguyen
Cleanroom - Pettit
CapabilitiesLithography - Spin Coating
Shared DriveNo share drive for this equipment.
Equipment access control, scheduling, and training is now managed within the Shared User Management System (SUMS) To schedule time on equipment within SUMS browse to https://sums.gatech.edu/Department/IEN log in, search for equipment, and click & drag to schedule time.
Equipment with Similar Capabilities
No similar equipment.
Standard Recipes and Reports
You must first log in to see the standard recipe files.
User Shared Files
You must first log in to see shared files.
There are no hourly rates for this equipment. You will only be charged for cleanroom time.
See our rates for more information.
You must first log in to see service requests for the SCS G3P8 Spin Coater - Instructional Center.
You must first log in to see the equipment log for the SCS G3P8 Spin Coater - Instructional Center.
Training SessionsTraining for the IEN Cleanrooms is now managed within the Shared User Management System. (SUMS) To get trained for the Cleanrooms, or equipment within the IEN department simply browse to http://sums.gatech.edu/Department/IEN Log in with your Georgia Tech username and password, then browse to the IEN Equipment Group page to learn new training info.