Wyko Profilometer NT3300
The Veeco noncontact profilometer uses the phase change of light reflecting from various heights of similar materials to measure the uniformity of a flat surface or the horizontal distance between two adjacent surfaces.
-motorized stage (tip/tilt & x/y/z)
-upgraded Veeco 'Vision' software w/ additional features
You must first log in to see the status.
Cleanroom - Marcus Inorganic
CapabilitiesMetrology - Film Uniformity
Metrology - Imaging
Shared DriveAccess Shared Drive
You can schedule in advance up to 3 days from today
Maximum of 2 hours during peak hours ( Mon-Fri [8AM - 5PM] )
Maximum of 8 hours total per day
You cannot have less than 120 minutes between 2 time blocks.
You are allowed to schedule within the next 8 hours with no penalty. This overrides any conflicting rules listed above.
As a precaution, you will be issued a warning if you exceed 4 hours of continuous usage.
You will be suspended and logged out of the equipment if you exceed 6 hours of continuous usage.
You must first log in to see the schedule.
Equipment with Similar Capabilities
No similar equipment.
Standard Recipes and Reports
You must first log in to see the standard recipe files.
User Shared Files
You must first log in to see shared files.
You are billed the cleanroom hourly rate when logged into this tool, even if you are not logged into a cleanroom.
See our rates for more information.
You must first log in to see service requests for the Wyko Profilometer NT3300.
You must first log in to see the equipment log for the Wyko Profilometer NT3300.
Choose from the sessions below or request a new time.